Mon-Fri, 8:30-17:00
dinner 13:00-13:30

PF-133 Enamel

Buy

GOST 6631-74

Sphere of application

It is intended for painting wooden and preliminarily primed metallic surfaces to be operated under atmospheric conditions as well as for painting articles to be operated indoors.

The enamel shall be applied in two layers onto dry surface cleaned preliminarily against dust, fat, dirt and old enamel. The enamel is ready to use and to be applied by spraying or by means of a brush. Prior to use, the enamel shall be stirred thoroughly; in case of its thickening, it is allowed to dilute it to the working viscosity using thinner of grade 649 for applying by means of a brush or thinner of grade 646 for applying by the spraying method.

Specifications

The coating system consisting of two layers of NTs-132 enamel applied onto a primed surface shall preserve its protective properties in the temperate climate for at least two years. The enamel consumption for a single-layer coating is 50-150 g/m2 depending on the color.

The time of drying of one layer at the temperature of (20±2)°C is no more than 3 hours.
99999 /en/