GOST 10277-90
Main properties
The NTs-0038 is a suspension of pigments in the blend of colloxylin and resin in organic solvents with addition of plasticizers.
Sphere of application
The filling is applied before applying the coating consisting of nitrocellulose, nitroalkyd and nitroepoxy enamels to be used indoors or under atmospheric conditions.
It is intended for local smoothing and elimination of paint defects (marks, scratches, chips, small dents, etc.) on metal and wooden surfaces primed with alkyd and nitrocellulose primers as well as for elimination of defects in an identified layer.
It is also used for smoothing and elimination of defects of primed metal and wooden surfaces. The nitrofilling shall be applied by means of palette-knife, brush or, after dilution with solvent 646, by means of a spray gun. The thickness of the dried layer shall not exceed 120 μm.
Specifications
Relative viscosity as measured by means of the VZ-246 viscosimeter with the nozzle diameter of 6 mm at a temperature of (20±0.5)°C: at least 30-70 s; non-volatile matter content: at least 63%; time of drying to degree 3 at a temperature of (20±2)°С: no more than 3 hours; to be ground without water; heat resistance at a temperature of 65-70°С: at least 8 hours.