Paintwork RAW

It is used for protecting the aluminum, steel or non-metal surface of articles to be used indoors or under fence in various climatic regions as well as for preparing the alkali-resistant enamel coatings; for obtaining the films with the volume resistivity of at least 5*10¹² Ω*m; coatings to be used under the conditions of increased humidity and temperature as well as under action of alkali solution and alcohol-gasoline mixture.

It is used for protecting the woodwork and printed units in all-climate versions to be used within the temperature range of –60 to +120°С and for creating electrically insulating protective coatings. It forms hard glossy coating with good adhesion and excellent physical and mechanical properties.

It is intended for protecting the surfaces of metal structures and articles during their short-term storage and transportation as well as for manufacturing aluminum paint.

They are intended to provide the protection in the multilayer coating of the preliminarily primed surfaces of the equipment, metal structures as well as concrete and reinforced concrete building structures to be operated indoors against attack of aggressive gases, acids and solutions of salts and alkalis at a temperature of not above 60°С.

To be used for painting of outer surfaces of freight cars and tank-cars, equipment, metal and reinforced-concrete structures exposed to attack of solutions of mineral acids, alkalis, salts, aggressive gases and other chemical reagents with the temperature of not above 60°C to be operated under atmospheric conditions of various climatic regions as well as indoors. It is allowed to apply the primer for other KhV and KhS enamels.

Is intended for ensuring the protection of the equipment and metal structures exposed to attack of mineral acids, alkalis, salts, aggressive gases and other chemical reagents with the temperature of not above 60°С in a multilayer complex coating (primer, enamel, varnish). It is recommended to use the KhS-76 varnish in combination with KhS-75U gray enamel and KhS-010U, KhS-059 and KhS-068 primer.

It is intended for lacquering parqueted floors of any type as well as other woodwork to be used indoors.

It is intended for finishing the furniture and other woodwork to be used indoors. The varnish is not to be polished.

It is intended for finishing the furniture and other woodwork to be used indoors with or without subsequent polishing.

Intended for coating parqueted floors

It is intended for obtaining a weather-resistant coating on the preliminary prepared surface of aluminum and its alloys as well as for using as an additive to plyptal and pentaphtol for increasing the coating shine.

It is intended for making a coating on wooden and metal surfaces (unpainted or painted earlier with oil-base paints) to be used indoors and under atmospheric conditions.

It is intended for impregnation of windings of electrical machines, apparatus and transformers, as well as for coating electrically insulating parts.

The KhV-0278 enamel primer is intended for painting the steel and cast-iron structures with residues of scale and tightly stuck rust (the thickness of the layer of corrosion products is up to 70 μm) exposed to attack of the industrial atmosphere containing aggressive gases and vapors as well as salts and other chemical reagents with the temperature of not above 60°С. The KhV-0278 enamel primer is used for painting the metal surfaces, which are hard to clean due to a number of causes, complex-shaped articles, such as grates, fences and garages.

EP-0199 primer is intended for use in complex systems of chemically resistant paintwork coatings for priming corroded surfaces of ferrous metals exposed to industrial atmosphere containing aggressive gases and vapors or to short-term soaking with acids and alkalis.

The KhS-068 primer is intended for protecting the equipment and metal structures against attack of mineral acids and alkalis at a temperature of up to +60°С in a complex multilayer coating. Primer color is henna.

FL-03 K: for priming the surfaces of ferrous metals, copper and titanium alloys as well as of wooden surfaces; FL-03 Zh: – for priming the surfaces of ferrous and non-ferrous metals, copper and titanium alloys as well as of wooden surfaces. The priming is allowed to be used in the shipbuilding industry and for the ship repair.

It is used for priming the parts of aluminum, magnesium and titanium alloys as well as carbon and stainless steel. The primers have good adhesion properties; the coating in a thin layer ensures high weather and heat resistance and mechanical strength of the film.

“PrimeLid” and “PrimeLid T” (thixotropic) fast-drying primers are intended for priming metal and wooden surfaces for coating with various enamels (pentaphthalic, melamine alkyd, perchlorvinyl, etc.), as well as for temporary protection from corrosion in a single-layer coating of large metal structures for the period of mounting and storage.

The VL-02 primer is intended for priming metal surfaces prior to application of paints and varnishes as well as for using instead of phosphatizing and oxidizing. It is used for priming the articles prior to application of alkyd, alkyd-melamine, epoxy, perchlorovinyl and polyurethane enamels. It is not used for priming cast iron.

To be used for painting of outer surfaces of freight cars and tank-cars, equipment, metal and reinforced-concrete structures exposed to attack of solutions of mineral acids, alkalis, salts, aggressive gases and other chemical reagents with the temperature of not above 60°C to be operated under atmospheric conditions of various climatic regions as well as indoors. It is allowed to apply the primer for other KhV and KhS enamels.

Intended for coating inner surface of metal and reinforced concrete tanks for KhS-558 and KhS-558V enamels and KhV-76, KhV-76 “V” varnish, used for storage and transportation of wine.

The primers are intended for priming metal surfaces for corrosion protection. They are used for priming articles from carbon steel, galvanized steel, aluminium and its alloys, copper and when performing repair works. EP-045K primer is intended for priming surfaces with residual rust.

It is intended for corrosion protection (in a complex coating with enamels) of metal surfaces of carbon steel under atmospheric and increased-humidity conditions.

It is intended for painting the metal and wooden surfaces prior to coating them with various enamels.

The primer is intended for priming metal and wooden surfaces for coating with various enamels as well as for temporary corrosion protection in the single-layer coating of large-dimensioned metal structures for the installation and storage period

The “Sadovichok” tree-protecting paint it is intended for protective and decorative painting of the stems and snags of main branches of fruit and decorative trees and brushwood for the purpose of improvement of winter hardiness of bark; protection against sunburns, rodents and hares; prevention of development of mosses and lichens as well as improvement of decease resistance.