Paintwork RAW

The paint it is intended for protective and decorative painting of all and new roofs made of mineral materials: asbestos-cement (slate) sheets, cement-chipboard at air temperature of not below 15°С.

They are intended for high-quality protective and decorative paint of walls and ceilings inside dry rooms. They are applied over brick, concrete, plastered and gypsum surface.

It is intended for high-quality protective and decorative painting of facades of buildings and structures (concrete, brick, and plastered surfaces) including performance of works for heat insulation of building facades. The paint can be used for painting internal rooms, particularly, bathrooms.

It is intended for high-quality protective and decorative painting of facades of buildings and structures (concrete, brick, and plastered surfaces) including performance of works for heat insulation of building facades. The paint can be used for painting internal rooms, particularly, bathrooms.

The paints are manufactured in two grades: VD-AK-154 and VD- AK-154-1; the VD-AK-154 paint forms semimat coating, and the VD-AK-154-1 paint – semigloss one. They are intended for protective and decorative external and internal painting of primed and non-primed wooden surfaces. The paint forms the coating having decorative and protective properties and is intended for high-quality painting of articles made of wood (windows, doors and panels), MDF, chip boards (except for painting floors). This paint can be used for painting other surfaces (plaster, concrete, gypsum boards, etc.). It is not intended for painting of building facades.

Advantages: in the fast-drying primer and paint for painting of wood products as a diluent use tap water. Transport, store and use the paint and primer at temperatures below 5 ° stored in closed storehouses heated in the winter. Transported in winter in heated cars. Paint and primer are fire and explosion.

It is intended for interior and exterior painting of buildings and structures over brick, concrete, plastered, wooden and other porous surfaces (except for floors), over old coatings as well as in the rooms with increased humidity (kitchens, bathrooms, toilets). The paint is used for painting both new and previously painted surfaces indoors.

It is intended for painting of metal surfaces with the residues of tightly stuck rust (with the corrosion product layer thickness of up to 100 μm) exposed to the industrial atmosphere containing aggressive gases and vapors as an independent coating as well as for providing the protection in the complex multilayer coating with weather-proof enamels and varnishes of the KhS, KhV, EP, ML or PF type, equipment and metal structures exposed to salts, aggressive gases and other chemical reagents with the temperature of not above 60°С.

It is intended for providing the corrosion protection of external surfaces of equipment, metal and reinforced-concrete structures and pipelines under conditions of the industrial atmosphere of chemical productions exposed to salts, aggressive gases and other chemical agents with the temperature of not above 60°С.

It is intended for painting wooden and preliminarily primed metallic surfaces to be operated under atmospheric conditions as well as for painting articles to be operated indoors.

The enamel shall be applied in two layers onto dry surface cleaned preliminarily against dust, fat, dirt and old enamel. The enamel is ready to use and to be applied by spraying or by means of a brush. Prior to use, the enamel shall be stirred thoroughly; in case of its thickening, it is allowed to dilute it to the working viscosity using thinner of grade 649 for applying by means of a brush or thinner of grade 646 for applying by the spraying method

The enamel is intended for protective and decorative finishing of wooden floors indoors

To be used for painting of outer surfaces of freight cars and tank-cars, equipment, metal and reinforced-concrete structures exposed to solutions of mineral acids, alkalis, salts, aggressive gases and other chemical reagents with the temperature of not above 60°C to be operated under atmospheric conditions of various climatic regions as well as indoors. It is allowed to apply the primer for other KhV and KhS enamels.

They are intended for painting of primed metal surfaces as well as wooden surfaces to be operated outdoors.

They are intended to provide the protection in the multilayer coating of the preliminarily primed surfaces of the equipment, metal structures as well as concrete and reinforced concrete building structures to be operated indoors against attack of aggressive gases, acids and solutions of salts and alkalis at a temperature of not above 60°С.

The black and reddish-brown enamels are intended also for protection of preliminarily primed surfaces of metal surfaces of metal structures in a multilayer coating, which are to be used under atmospheric conditions, against attack of aggressive gases of chemical industries at a temperature of not above 60°C and KhV-784 varnish – for priming concrete structures.

They are intended for painting of prepared metal and wooden surfaces, concrete and reinforced-concrete structural units exposed to gaseous media causing the steel corrosion. The enamels are not intended for finishing facades.

It is intended for painting of metal surfaces exposed to hot solutions of alkalis, which are either not primed or primed with EP-0010 or EP-0020 filling primers.

The enamel is intended to provide the corrosion protection of steel or copper articles to be operated under atmospheric conditions and indoors (process equipment and other metal structures, railway cars, marine transport vessels, bridges, etc.)