Primers

The KhV-0278 enamel primer is intended for painting the steel and cast-iron structures with residues of scale and tightly stuck rust (the thickness of the layer of corrosion products is up to 70 μm) exposed to attack of the industrial atmosphere containing aggressive gases and vapors as well as salts and other chemical reagents with the temperature of not above 60°С. The KhV-0278 enamel primer is used for painting the metal surfaces, which are hard to clean due to a number of causes, complex-shaped articles, such as grates, fences and garages.

EP-0199 primer is intended for use in complex systems of chemically resistant paintwork coatings for priming corroded surfaces of ferrous metals exposed to industrial atmosphere containing aggressive gases and vapors or to short-term soaking with acids and alkalis.

The KhS-068 primer is intended for protecting the equipment and metal structures against attack of mineral acids and alkalis at a temperature of up to +60°С in a complex multilayer coating. Primer color is henna.

FL-03 K: for priming the surfaces of ferrous metals, copper and titanium alloys as well as of wooden surfaces; FL-03 Zh: – for priming the surfaces of ferrous and non-ferrous metals, copper and titanium alloys as well as of wooden surfaces. The priming is allowed to be used in the shipbuilding industry and for the ship repair.

It is used for priming the parts of aluminum, magnesium and titanium alloys as well as carbon and stainless steel. The primers have good adhesion properties; the coating in a thin layer ensures high weather and heat resistance and mechanical strength of the film.

“PrimeLid” and “PrimeLid T” (thixotropic) fast-drying primers are intended for priming metal and wooden surfaces for coating with various enamels (pentaphthalic, melamine alkyd, perchlorvinyl, etc.), as well as for temporary protection from corrosion in a single-layer coating of large metal structures for the period of mounting and storage.

The VL-02 primer is intended for priming metal surfaces prior to application of paints and varnishes as well as for using instead of phosphatizing and oxidizing. It is used for priming the articles prior to application of alkyd, alkyd-melamine, epoxy, perchlorovinyl and polyurethane enamels. It is not used for priming cast iron.

To be used for painting of outer surfaces of freight cars and tank-cars, equipment, metal and reinforced-concrete structures exposed to attack of solutions of mineral acids, alkalis, salts, aggressive gases and other chemical reagents with the temperature of not above 60°C to be operated under atmospheric conditions of various climatic regions as well as indoors. It is allowed to apply the primer for other KhV and KhS enamels.

Intended for coating inner surface of metal and reinforced concrete tanks for KhS-558 and KhS-558V enamels and KhV-76, KhV-76 “V” varnish, used for storage and transportation of wine.

The primers are intended for priming metal surfaces for corrosion protection. They are used for priming articles from carbon steel, galvanized steel, aluminium and its alloys, copper and when performing repair works. EP-045K primer is intended for priming surfaces with residual rust.

It is intended for corrosion protection (in a complex coating with enamels) of metal surfaces of carbon steel under atmospheric and increased-humidity conditions.

It is intended for painting the metal and wooden surfaces prior to coating them with various enamels.

The primer is intended for priming metal and wooden surfaces for coating with various enamels as well as for temporary corrosion protection in the single-layer coating of large-dimensioned metal structures for the installation and storage period